Riding Lessons

Isabella started riding lessons earlier this fall. She goes every other weekend to Outback Stables in Ledyard for a one hour lesson. It is a lot for her to focus on (and for a whole hour at a time). She needs to watch the position of her hands, make sure the horse keeps moving at the right pace, pay attention to where the horse is going, and not be distracted by the dogs wandering about. Plus probably a bunch of other stuff that I have know idea about since I have no clue how to ride a horse.

Not surprisingly she has wound up with the horse stopped facing a wall. Luckily there are lots of years left before she tries it with a car – at least a horse stops before running into the wall. She is making progress, and can usually get the horse out of a corner without help. I can tell it is getting a little easier for her. The first lesson she was pretty tired after 10-15 minutes and needed the teacher to walk the horse with her on it. Last lesson she almost made it the entire time on her own.

Trying hard to keep her hands in the right position.
A very happy Isabella.
Not too bad… at least not walking into a wall!
And a little play time waiting for her lesson to start.

New addition to the family: Welcome Hoagie!

Will had been asking to get a dog of his own for several years. We weren’t quite ready to add a new dog to the family while he was still in school, and when we were ready in the middle of the pandemic, it was nearly impossible to find a dog.

This summer we discussed it more, and agreed that he would be able to get a dog after our trip to Europe. We got approved by one of the local rescue organizations, and found Hoagie. Hoagie was being fostered near New Haven, and over the labor day weekend we went to visit him. Will (and of course Izzy) fell in love with him at the meeting, and later that weekend we picked him up.

He is still getting adjusted to his new house and Will has put him in training. Izzy has lost a few toys, though she has plenty to spare, and we lost a remote, which we don’t have a spare.

Hoagie

Attempting to repair an GE Adora Series Dishwasher (Part 2)

I attempted a homemade repair to the dishwasher back in February. It lasted a few months and then started leaking again. This time I ordered the new diverter valve ($60) and Ben and I installed the part this morning. It seems to be working for now; however, some of the reviews state that the repair part only lasts a year or so before it starts leaking again. So maybe next summer I’ll be replacing it again.

Failed diverter valve.

A quick project – old school (no power tools)

I have been spending my workshop time over the past few months on organizing and cleaning, and haven’t really built anything in a while. I needed a shelf to store supplies for the chicken coop, had some twice reclaimed pine, and decided to get the hand tools out and build a very quick shelf.

The first step was to mark off the length of the shelf. It is a utility shelf,and I had plenty of room, so I just cut off the ends of the pine board I had.

The wood was already milled, but had cupped a bit. I decided to use it cupped, because it was going to be inside the barn, and I didn’t really want to thin out the boards too much just to get them flat. Plus flattening by hand was more work than I wanted to do this afternoon, and spinning up the jointer would defeat the purpose of a hand tool project.

Next step was to cut a dado in the sides to hold the shelf. I marked the edges of the dado, cut with a hand saw, and used a chisel to get out most of the material.
I then cleaned out the dado with the router plane.
The shelf was assembled using cut nails. One problem with not flattening the boards was that a piece of the shelf support on the far side split off, but it doesn’t impact the functionality of the shelf.
And, shelf installed. I did use screws and a cordless drill diver for this step. Now my pile of supplies is no longer sitting on top of the feed bin (at the bottom of the picture).

A $1 Garage Sale Find

Disston saw cleaned up and ready to use. Saw vice is on the bottom of the picture. File and the saw set are on the top. The vice and saw set have been sitting in a corner of the shop for years.

Last weekend I had to drive to Chaplin, CT to pick up Ben from a friend’s house. Izzy joined me for the drive, on the promise that we would stop by a garage sale if we found one. And we found only one that braved the rain to have a sale. We looked around a bit, and I let Izzy pick up two toys and a book that were being given away for free. I found a rusty Disston panel saw covered in rust for $1 and picked it up.

The medallion on the saw indicates that the saw was made between the wars (1917-1940), at least according to the Online Reference of Disston Saws. This week I took off the handle and cleaned the rust off the blade. I cleaned up hte handle and coated it with spar varnish. Tonight I reassembled the saw, did a quick sharpening, and set the teeth. A quick test cut on some pine, and I have a second fully functional saw for the workshop. I should probably hit the teeth with the file again for one quick finishing pass and try the saw on something harder like oak.

Maybe I should get around to sharpening the 5-6 saws I have hanging on the shop wall for decoration. I also should have taken a picture before I cleaned up the saw.

Chicken and Duck Update (eggs are slowly coming in)

As of this morning, we are down to 12 chickens and 6 ducks. We lost three chickens over he past few months, one of the chicks, and two of the original hens. The young ducks and hens have started to lay eggs, but not consistently. Over the past few days, we have been getting 3 eggs every 2 days from the ducks. And the ducks don’t use nesting boxes, so we have to go looking for them. We have been getting on or two eggs a day from the hens, with one fairly consistently from the old hen I think. Today we got a total of five eggs, two from the ducks and three from the chickens.

Today’s egg harvest. The top two are the duck eggs.

Dinosaurs, Hikes, Chickens and Ducks

A few weeks ago a friend recommended a Facebook group for local hikes. That has been a goldmine of ideas. One of the places that was recommended was Wells Dinosaur Haven. Late April, Ben, Izzy and I visited Dinosaur Haven, a private house in Montville that is open to the public (as long as you call first to make sure they will be home). The homeowner met us and gave us a tour of the fiberglass dinosaurs he has been making for the past 40 years.

Taking it easy at Wells Dinosaur Haven

Izzy had a blast, and wants to go back. It probably helped that it was a very short walk.

Hanging out with the dinosaurs!

Today we decided to give Susanna some time alone in the house. We headed to Preston City and hiked the Preston Nature Preserve Trail. The trail was lightly marked, but an easy 1.1 mile hike with Izzy. We found a box turtle and large rat snake along the way. After the hike we headed to Buttonwoods Farm for ice cream. My goal this summer is to explore as many of the short hikes around the area with Izzy – I just may have to bribe her with more ice cream.

The corner of Fuller Ct and Main St somewhere in the middle of the Preston Nature Preserve

We rounded out the afternoon by letting the new chickens and ducks out of the run into the back yard for an hour or so. Eventually we will build a ramp and let them out behind the garage and not in the fenced back yard, but at this time it seems best to keep them supervised; they are young enough to be easy pickings for a hawk. We are tying to figure out how many of the ducks are hens and how many are drakes, at this time our best guess is 4 hens and 2 drakes, but they are still young and we aren’t the best at telling the differences.

Izzy hanging out with the chickens and ducks.

Visiting the Connecticut College Arboretum

Yesterday morning I had a few hours open before I had to drive with Ben to get his first round of COVID vaccine. So,Izzy and I decided to visit the Connecticut College Arboretum. She wanted to look for frogs and tadpoles, and we found some day or two old tadpoles in the swamp. She, for once, let me take pictures of her and didn’t just make silly faces. To top it off, and probably her favorite thing, there were a lot of people walking dogs there in the morning; she got to pet five of them. Here are pictures from the visit.

One of the few pictures where she isn’t making a silly face!
Enjoying the morning.
Taking underwater pictures, trying to get images of the tadpoles
In her element, looking for tadpoles